Xado Magnum Diesel Trucks Construction Machinery Revitalizant

Revitalization of truck engines Designed for engine renovation and active protection during operation. A product with the properties of a 3rd generation Revitalizan: one-step application, quick action, increased protective properties. EFFECT: The Revitalizant has a targeted effect on surfaces that are exposed to friction. The modification occurs through physical-chemical interaction of the surface layers with the participation of a revitalizing agent during normal operation. Exploitation is a prerequisite for Revitalizant to be effective. The new technology for activating revitalizing nanoparticles causes them to act as a catalyst for rapid changes in friction zones and self-regulate the process of overgrowth of nano- and micro-damage in friction-worn layers. It triggers the process of carbon absorption in the surface layer, which leads to the accumulation of iron carbides in this zone. With the participation of the carbides contained in the oil and the steel dust rubbed off the surface, a new layer is formed in the zones of excessive amounts of energy, which corresponds to the name metal-ceramic. Diffusion into the base metal creates a super-hard layer with compressive stresses that extend across the entire depth. The layer has advanced protective properties and the ability to self-regenerate over a long period of time. EFFECT: Renewal and protection against wear of the friction elements of the piston-cylinder unit, the shaft with connecting rods and the control mechanism • Creation of an effective system for protecting engine details from wear and overload in any operating conditions • Balancing and increasing compression in the cylinders • Protecting the engine from the negative effects of cold starts • Significant reduction in fuel consumption • Reduction of harmful gas emissions into the atmosphere • Increasing the oil pressure in the lubrication system to the nominal value • Increasing engine power and improving its flexibility • Reduced noise and vibration levels • Extends the life of the motor units by 2 to 3 times. Application: Insert the contents of the tube into the warm engine through the oil filler neck. Start the engine and let it idle for 3-5 minutes. Then continue working normally. Warm the preparation to room temperature before use. Store out of the reach of children and at temperatures from minus 40 degrees C to a maximum of plus 50 degrees C. Dosage One tube of 1 Stage MAGNUM Revitalizant Gel (90 ml) is sufficient for 30-45 liters of engine oil. Tests have shown that even three times the amount neither accelerates nor increases the effectiveness of the preparation. There were no negative effects either. Info Mixable set with all types of oil. The use of other additives does not have a significant impact on the effectiveness of Revitalizant, regardless of the order of application. The revitalization extends over a distance of approximately 1000 km. Do not change the oil during this time. The reuse of 1 Stage MAGNUM is recommended after approximately 100,000 km.