Xado EX120 revitalizing petrol/LPG engine

The latest EX120+ in a tube with unlimited shelf life and additional anti-counterfeit protection Xado is gradually eliminating old syringe packaging. The tube with the new EX120+ contains up to 12% more Revitalizant (9 ml) compared to the series in syringes (8 ml). ADVANTAGES after using the Revitalizant By sealing the piston-ring-cylinder unit, the engine is automatically cleaned of contaminants. The product allows you to balance and increase compression in the engine cylinders. After using Revitalizant, starting the engine on cold mornings is no longer a problem. The starter is not “ignited”. The oil pressure in the system increases to the nominal value. You will notice significantly lower fuel consumption. At stops and in traffic jams. Engine performance is increased by up to 30% and operational flexibility is restored. You will enjoy driving and turning more. After using XADO EX120+, engine noise, vibration and noise levels will decrease. And a tenfold increase in their value prevents the engine from disturbing you with its excessive roar. Using Revitalizant extends the life of engine components by two to four times. The resulting metal-ceramic layer protects the engine from the consequences of a “dry start” when the oil is still at the bottom of the engine, in the oil pan. The first effects of the improved engine performance become apparent after 50-100 km of driving. The manufacturer of the XADO EX120+ allows continued travel over a distance of up to 300 km in the extreme case of an emergency oil leak on the engine. Watch the video on YouTube: " Using the XADO EX120+ is easy. There is no need to disassemble the engine. The product is applied through the oil filler hole. It spreads quickly in the warm engine, regardless of the type of oil (synthetic, semi-synthetic or mineral). It can be used in gasoline engines, high-performance engines and turbocharged engines. EX120+ is not harmful to catalytic converters and filters. For prevention, you can use 1 applicator per Use 2-5 liters of oil in the system. In this case or with a new engine, the treatment can be done in one step. However, if we need to carry out a “renewable overhaul”, the revitalization of the engine, which holds 3-10 liters of oil, is done in three steps, 1 applicator every 250 km (1+1+1). 1. Bring the engine to operating temperature by driving 10 km. 2. Turn off the engine and add the product to the oil. 3. Start the engine at low speed for 3-5 minutes. 4. Stop the engine or start driving.