Xado Anticarbon piston ring release agent 320 ml set

Effective agent for unlocking piston rings in gasoline and diesel engines. Fast-acting agent for removing carbon deposits from burned rings and grooves. Based on our own recipes using BASF components. Removes all carbon deposits and tar deposits from piston surfaces, liners and rings. No engine oil change is required after use. Advantages ⭕Restores freedom of movement of piston rings ⭕Reduces fuel consumption ⭕Cleans cylinders, pistons, combustion chambers, valves from all types of dirt (carbon deposits, varnish, tar) ⭕Evens compression in the cylinders ⭕Reduces engine noise ⭕Removes deposits from spark plugs (heating) ⭕Reduces the emission of harmful compounds into the exhaust gases Application Allow the engine to warm up – warm, but not hot. Remove the spark plugs (injectors) and disconnect the ignition system. Spray the contents of the container through the tube into each cylinder one at a time (approximately 5 seconds). Screw in the candles. Wait 10-20 minutes. Remove the spark plugs. Cover the spark plug holes with an absorbent cloth to prevent dirt from getting on the paint. Turn the starter for a few seconds. Install the spark plugs (injectors). Start the engine and keep the speed slightly increased for 15 minutes. During this time, the remains of the softened carbon deposits are removed via the exhaust system. Dosage One aerosol container is enough to remove carbon deposits on the rings of 20 cylinders. Notes ⭕ Avoid contact of the preparation with the lacquer layer. ⭕ The preparation is harmless for catalytic converters, lambda sensors, rubber seals and sealants. VERYLUBE ANTICOKE can be used to wash the engine oil system: 1. Pour the agent into the oil filler hole of the warm engine in the ratio of 40 ml of the composition to 3-5 l of oil. 2. Run the engine at low speed for 10-15 minutes. 3. Change oil and oil filter. Cleans the turbocharger and intake system well. Very useful for cleaning LPG evaporators.