XADO Stop Leak Engine eliminates engine leaks and makes seals more flexible. oil additive

Xado AtomEX Stop Leak Engine - solves and blocks leaks Xado Stop Leak Engine stops engine oil leaks caused by damaged, hardened engine seals and gaskets. It contains components that restore the elasticity of the seals, restore contact between the seal and the metal and prevent oil leaks. Can be used universally in all types and variants of engines (vehicles, machines, stationary devices, etc.). Safe for turbo engines. AtomEX STOP LEAK ENGINE can be used in gasoline and diesel engines. Both with catalyst and filters in the system such as DPF, FAP, etc. Benefits after using AtomEX Stop Leak Engine for Oil Safe as it is perfectly miscible with all types of engine oils. It does not cause the oil to become sticky and does not clog or stick filters or oil spray points. Preserves and restores the elasticity of shrunken and slightly deformed rubber seals and gaskets. Improves proper contact between metal and gasket. Stops engine oil leaks up to 0.9 mm and prevents them from continuing. You can avoid expensive repairs or “buy time” to collect money in the event of a cost-critical failure. Application: Use eine 250-ml-Flasche for 4-5 liters of oil. Crowd. For small engines, the proportion should not be more than 10% of the oil volume. Add to warm engine oil. The sealing effect occurs after approx. 300-500 km of driving. NOTE: If there are cracks in the seals or large defects in the rubber, the gap may simply be too large for the fluid to fill and harden under the pressure. The drawing on the right shows the elimination of an oil leak at the seal-metal interface: 1 – before applying AtomEX SLE, 2 – after applying AtomEX SLE, A – metal element, B – seal. Very often engine gaskets dry out and crack due to high temperatures, acidity of the oil (which increases replacement time) and lack of maintenance. Long and intensive engine operation, loss of seal elasticity - all this sooner or later leads to leaks in the oil system.