Welding machine workshop MIG MAG FLUX MMA complete set

A semi-automatic welding machine designed for manual electric welding of steel using a self-protected wire (FCAW flux cored arc welding process), MIG/MAG, MMA as well as the TIG lift method (this requires the purchase of an additional TIG weld holder lifting device) MIG/MAG, MMA and the TIG lift method (this requires the purchase of an additional TIG welding holder lifting device) method FCAW is arc welding with cored wire. It is a welding process that is similar to the MIG/MAG process, except that the wire is filled with flux or a chemical substance that produces shielding gases during welding. FCAW welding combines the advantages of welding with one coated electrode and the MAG process: Very high efficiency (no need to change the electrode frequently) Can also be welded outdoors (the flux additionally protects against oxidation of the weld), which does not require very high qualifications of the welder It is intended for all types of welding work in locksmith workshops, repair shops, plumbing workshops, on farms, etc. The power source is built on IGBT transistors to ensure minimal electromagnetic interference and low power losses in the basic circuits, which allows higher efficiency and reliability of the power source and lower consumption SPECIFICATION: Supply voltage: 230 V Frequency: 50 Hz Rated input capacity: 3.7 kVA Welding process: FLUX - semi-automatic welding with self-protection wire "without gas" Electrode range: 1.6-4 mm Wire diameter: 0.6-0.8 mm Wire coil weight: max. 1 kg Nominal welding cycle: 25% Protection class: IP21S MIG welding current: 40-200 A MMA welding current: 20-200 A Protection level: H Weight: 5.6 kg COMPOSITION OF THE SET: Welder Hand mask Brush with hammer Grounding cable Electrode wire Integrated MIG gun Self-shielding wire 0.8 mm 0.45 kg - 2 pack