Teroson MS 9220 glue black 310ml

TEROSON MS 9220 BK Black cartridge 310 ml adhesive and sealant The adhesive TEROSON MS 9220 is a solvent- and isocyanate-free silane-modified polymer with excellent adhesive and sealing properties for bonding various substrates such as stainless steel, aluminum and other metals, wood and painted surfaces. Body repair: gluing; for all areas that involve bonding and sealing. The molting time is 15 minutes. Dosing with any professional piston juicer. It is recommended to prepare the surface with TEROSON® VR 10 remover. A flexible product with excellent sealing properties. High initial adhesion. High resistance to aging, external influences and UV radiation. Salt water resistant. Possibility of spot welding before curing. Without isocyanates. Does not contain any solvent. Application: Terostat 9220 is used in the following areas: in body and vehicle construction, in wagon and container construction, in boat and ship construction, in apparatus, facade and metal construction, for flexible, primer-free and high-quality connections, for metal and painted surfaces. In addition to Teflon, PE, PP and mixtures with these polymers, Terostat 9220 is also used for bonding glass, ceramic surfaces and many plastics. Terostat 9220 mass can replace mechanical connection methods such as screwing, welding or clamping. Application: Preliminary remark: Please read the safety instructions and information in the safety data sheet before using the compound. Even for products that do not require labeling, general precautionary measures must be observed when handling chemicals for reasons of occupational safety. Surface preparation: The adhesive surfaces must be dry and free of dust, grease and sand as well as other elements that reduce adhesion. FL Remover is suitable for washing. Application: A hand press is used to apply the Terostat 9220 mass from 310 ml cartridges. Technical data Black color. Odor odorless. Consistency: thixotropic paste. Density: approx. 1.4 g/cm3 Stability: very good (ISO 7390, profile U 20) Type of curing: under the influence of moisture Skin formation time: 10 - 20 min (DIN 50014-Norm: 23 °C, 50% relative humidity) Curing speed: approx. 3.5 mm/24 hours. (DIN 50014-Norm: 23 °C, 50% relative humidity) Shore A hardness: approx. 55 - 60 (DIN 53505) Tensile strength (DIN 53504): approx. 3.3 MPa Shear strength (DIN EN 1465): approx. 4.4 MPa Volume change (DIN 52451): < 2% Application temperature: 40 °C to + 100 °C (short term up to 1 hour) + 120 °C.