Solar system complete solar package hot water with storage 1650W

The set consists of 4 monocrystalline solar modules with 410 W, the ECO Solar Boost 3.5 kW PRO converter and a complete 25 meter long cabling with MC4 connectors on one side and ring cable lugs for the converter on the other side Product features The set consists of 4 monocrystalline solar modules with 410 W, the ECO Solar Boost 3.5 kW PRO converter and a complete 25 meter long cabling with MC4 connectors on one side and ring cable lugs for the converter on the other side. The system is simple, it only requires the connection of 4 typical photovoltaic modules or the corresponding number of others and an energy receiver, e.g. electric boiler, underfloor heating. The ECO Solar Boost PRO converter is equipped with an LCD display that informs the user about the parameters of the PV system, such as: voltage of the PV generator system Electricity generation by PV modules Output power Total energy production on the current day Total energy production on the previous day Total generation energy (measured from the first switch-on) In addition, the display shows current events and detected irregularities in the form of text messages Direct current generated in modules, which cannot be supplied directly to heaters, is converted into alternating current in the inverter, which can be used to operate heaters The maximum power of the system is 3.5 kW, the inverter has one Priority output "1", which is always live, and a dependent output "2", which turns on when output "1" is loaded with a lower power than the power supplied by the connected PV modules, and turns off when all the energy generated via output "1" is used up. This allows you to connect two heating devices, for example two boilers, one of which heats up first and the other when its thermostat no longer receives energy from the converter. Thanks to the implemented MPPT function, the adapts The converter automatically adapts to the power of the heater and sets its operating point so that the energy received by the photovoltaic system is maximum. Danger! Heaters with electronic control can only be operated via output No. 1 THE INVERTER IS USED ONLY TO SUPPLY POWER TO THE HEATER Converter PARAMETERS: Input voltage [VDC]: 120 to 350 (VDC) Output voltage [VAC]: 120 to 350 (VAC) Maximum power: 3.5 kW MPPT function: YES Connection of PV modules: Serial or Serial parallel Voltage curve at the output: Modified sine wave VAC output No. 1: Priority VAC output No. 2: Dependent * Under-/over-voltage protection: YES Thermal protection: YES Overload protection: YES Working temperature: -25°C ~ +55°C Efficiency: > 96% Cooling: Active Power connection: MC4 connection 230V Output socket: 2 x E (with pin) Housing: Aluminum Protection class (IP): IP21 Dimensions LxWxH [mm]: 320x272x96 Weight [kg]: 4.1 kg PANEL PARAMETERS: Rated power Pmax (W): 410 Power tolerance Pmax Maximum: 0 ~ +5 Maximum voltage Vmp [V]: 31.22 Current in rated power lmp [A]: 13.06 Open circuit voltage VOC [V]: 37.34 Short circuit protection [A]: 25 Short-circuit current [A]: 13.7 Module efficiency [%]: 20.97 Maximum operating voltage: 1500 VDC Working temperature: -40 ° C + 85 ° C Load (snow / wind): 5400 Pa / 2400 Pa Cells: Mono 182 × 182 mm Number of cells: 108 (54 × 2) Module dimensions [mm]: 1723 × 1133 × 35 Weight [kg]: 21.5 Glass: 3.2 mm glass, tempered glass Junction box: IP68 Connections: MC4 compatible Set contains: 4 x Solar 410W modules ECO Solar Boost 3.5kW PRO 25 meter cable set with plugs (25 m black + 25 m red)