IsolBau FLEXIBLE LIQUID FOIL BATHROOM INSULATION Bathroom sealing set 12 kg

SEALING SET for comprehensive sealing in bathrooms, kitchens, laundry rooms etc. The pack contains: Liquid film - 12 kg Sealing tape - 20 m Sealing sleeve - 2 pcs. Inner corner - 4 pcs. The outer corner - 4 pcs. (Please specify which corners no message should be sent to, we send 2 corners) Primer 1l - 2 pcs. If you need additional corners, these are available in other auctions. The set is perfect for use in: bathrooms, toilets, laundries, kitchens and any other places exposed to moisture. Fluidfilm is a ready-to-use, one-component, semi-liquid mass based on a polymer dispersion with thixotropic properties. Downstairs indoors under ceramic tiles. PRODUCT FEATURES Very good adhesive adhesion Bridges cracks For use on dry and wet surfaces Permanently elastic For use on vertical and horizontal surfaces Ready-to-use compound APPLICATION: is intended for the flexible and waterproof sealing of typical construction surfaces before laying tiles fixed with adhesives in places exposed to water and moisture (bathrooms, toilets, showers, kitchens, laundries, etc.). Sealing tape for liquid film. Waterproof and flexible adhesive tape for permanently sealing expansion joints, cracks and connection joints. For use in areas exposed to moisture such as: B. Corners, wall-to-wall and wall-to-floor connections. It can be used inside and outside the building. Membrane material: TPE Carrier: PES knitted fabric Thickness 0.50 mm ± 0.05 mm Total width of elastomer coated belt (membrane) 120 mm ± 2.0 mm 70 mm ± 2.0 mm Elongation length 38% Elongation over 96% Water resistance > 1.5 bar Reactive silicate polymer primer. PROPERTIES Homogeneous, thin, milky-white liquid, containing potassium silicate and acrylic dispersion with additives. After drying, it practically does not form a coating, causes hydrophobization and silicateization of the substrate, diffusion. APPLICATION: In the case of silicating mineral substrates, infiltration into not very compact and crumbly substrates leads to their hardening (hard calcium silicates are formed) and to the equalization of the absorbency. before laying tiles, thin concrete screeds, etc. Primer of mineral, cement, cement-lime plasters, concrete. for substrate preparation for all mineral, polymer and bitumen insulation. The product can be used in closed rooms intended for the constant stay of people. Do not use on wooden surfaces. SUBSTRATE PREPARATION New plasters, concretes and other mineral substrates should be bonded and applied. Remove old, loose, poorly adhering, brittle and flaking layers. If the surface requires leveling, fill any unevenness with a mineral mortar, depending on the type of surface. APPLICATION Stir Tifengrund pro thoroughly in the container. Apply the product to the surface in one layer using a brush or paint roller. It can be applied to large areas using sprayers. For highly absorbent and porous surfaces in two layers. TOOLS Brush, paint roller, sprayer. STORAGE The product is sensitive to sub-zero temperatures. Store, transport and use at room temperature. +5°C. Shelf life 12 months from date of manufacture. Liquid film is a ready-to-use, one-component, semi-liquid polymer dispersion-based mass with thixotropic properties. After drying, a dense, compact, flexible, water-resistant and seamless coating insulation is created. For indoor use under ceramic tiles. The ecological product does not contain any solvents. PRODUCT FEATURES Very good adhesive bond Bridges cracks For use on dry and damp substrates Permanently elastic For use inside buildings For use on vertical and horizontal surfaces (thixotropic) Ready-to-use mass APPLICATION Liquid film is used for the flexible, waterproof sealing of typical building surfaces before laying tiles attached with adhesives in places that are exposed to water and moisture (bathrooms, toilets, showers, kitchens, laundries etc.). Liquid film should be used on surfaces that are not exposed to negative temperatures. TECHNICAL DATA Apparent density, g/cm3 1.35 ± 10% Consistency at 23 ± 2 °C Thick liquid, easy to apply with a brush. Drying time: min. 30 ± 10 vertical flow, immediately after application. No sagging. Water content ≤ 35%. Content of non-volatile components 67.8 ± 3.4%. Appearance of the coating. Bubble- and crater-free coating with good adhesion to the surface. Application: The product is used for moisture-repellent coatings on horizontal and vertical surfaces before laying ceramic tiles and other finishing coverings in rooms with high levels of moisture, e.g. B. in rooms, recommended. E.g. kitchens, bathrooms, toilets, laundries, shower cubicles, basements, car washes, etc. The insulating liquid film can be applied to concrete and reinforced concrete structures, cement and cement-lime plasters, masonry elements made of bricks, hollow bricks, light aggregates and aerated concrete - made for full joints, gypsum plasters (with moisture < 4%), gypsum plasterboards, cement screeds, Anhydrite screeds (with