HYDRAULIC DISTRIBUTOR 4SEK 40L 24V + CONTROL starter set

4-piece hydraulic distributor, 40 l/min, electrically controlled, 24 V, included with control panel and wiring harness Product Features 4-piece hydraulic distributor, 40 l/min, electrically controlled, 24 V, included with control panel and wiring harness Application: It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and commonly understood industries Distributor is adapted to different types of machines, such as: agricultural machinery, tractors, sprayers, turners, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other equipment with a hydraulic system The control panel allows you to control four sections in an electrically controlled hydraulic distributor A set of cables that allows the electrical connection of the distributor to the central unit Technical data The set includes a splitter, a control panel with a set of cables and Plug. Recommended oil flow in the system: 0 - 40 l/min. Control example: four double-acting drives. Possibility of serial connection to the existing system (pressure sleeve required). Check: All three-position slides (1 - 0 - 2) are spring-loaded, i.e. h. they automatically return to the neutral position after the power supply is switched off. While the piston is in the neutral position (0), the oil flows unhindered through the distributor into the return channel, the pump then works without pressure and is unloaded. The operating principle of the slide: neutral position 0 (the power supply to both coils is interrupted) the piston rod of the actuator is stationary - the oil runs to the overflow. Working position 1 (the supply is only to the first coil), the piston rod of the actuator extends. Working position 2 (the supply is only to the second coil), the piston rod of the actuator retracts. On the right the hydraulic diagram of the distributor: GENERAL INFORMATION ELECTRICAL SALES PARTNER: Electricity: Power supply 24V ----------------------------------------------------------------- ---------------------------------- Connection: Pump inlet (P1, P2): BSP 1/2'' female thread Return to tank (T1, T2): BSP 1/2'' female thread Sections (A1, A2, A3, A4; B1, B2, B3, B4): BSP 3/8'' internal thread Thread series connection (N): BSP 1/2" internal thread ----------------------------------------------------------------- ---------------------------------- Pressure range: Maximum supply pressure: 250 bar Maximum pressure on the return line: 50 bar Maximum pressure on the sections: 300 bar The pressure relief valve is factory set to 180 bar ± 30 bar. It is recommended to set the correct pressure before commissioning Pressure to check and the possibility of independent adjustment, full rotation to change by 30 bar ------------------------------------------------- ------------------------------------------------- Oil types recommended by AGRICOLA: Rare quality oil: LOTOS AGROL BOXOL 26 A thicker quality oil: FUCHS AGROFARM HYDRATEC HVI 46 ----------------------------------------------------------------- ---------------------------------- Recommended oil temperature range: Permissible ambient temperature: -40 C to +60 C Permissible oil temperature: -15 C to +80 C GENERAL INFORMATION CONTROL PANEL: All on/off switches with automatic centering (1-0-2) without locking. Each panel is sold complete with a two meter long power cable and a combined four meter long cable with plugs that connects the panel to the splitter. Sets of 3 m, 6 m or 10 m long extension cables are also available in other auctions, which are used to activate the warning signal (horn, signal light). or the coil of the pressure relief valve (CETOP distributor) or can be used to switch on the pump via a relay.