Fischer chemical anchor FISCHER FIS VL 300 T chemical anchor screw adhesive anchor injection mortar composite anchor 540983

A robust injection mortar for standard applications in cracked concrete and masonry

Advantages The FIS VL system is approved for use in cracked concrete and masonry and achieves high strength values ​​in these substrates. The vinyl ester resin-based injection mortar enables anchoring in holes filled with water (only for 410 ml cartridges) and thus enables rapid work progress. The temperature after the FIS VL injection mortar has set should be in the range of -40 °C to +120 °C so that the mortar has a high load-bearing capacity even at higher temperatures. The FIS VL HIGH SPEED version of the mortar has a significantly shorter setting time than FIS VL, meaning rapid progress is possible even at low temperatures. The fischer injection mortar FIS VL is a hybrid vinyl ester mortar that is approved for standard fastenings in cracked concrete and masonry. The FIS VL mortar is processed indoors and outdoors using proven system components such as the fischer threaded rod FIS A and the fischer internal thread anchor RG MI. The thermal resistance of the FIS VL mortar in the range from -40 °C to +120 °C enables stable loading even at extreme temperatures and thus ensures high flexibility. The short curing time of the FIS VW HIGH SPEED variant ensures rapid work progress even at low temperatures. Function FIS VL is a 2-component injection mortar based on vinyl ester. Resin and hardener are placed in two separate containers and remain unmixed and inactive until extruded through a static mixer. The hole is then filled with mortar from below without any air bubbles. The mortar bonds the entire surface of the bar to the walls of the hole and completely seals the hole. Die 410-ml-Koaxialkartusche can be easily dosed with the FIS AC injection gun. Partially used packaging can be reused after replacing the mixer.