Fischer CHEMICAL ANCHOR FISCHER FIS VL 410 C chemical anchor screw adhesive anchor injection mortar composite anchor 540986

CHEMICAL ANCHOR FISCHER FIS VL 410 C 12 PIECES/PACK Parameters: Manufacturer: Fischer Model: FIS VL 410C Mixer: 2 pieces Capacity: 1x 410 ml Approval for fastenings in: Concrete C20/25 to C50/60, cracked, lightweight concrete blocks, ceramic blocks, Oustaki Silikatowe, solid silicate blocks, solid bricks Product features CHEMICAL ANCHOR FISCHER FIS VL 410 C 12 PIECES/PACK Parameters: Manufacturer: Fischer Model: FIS VL 410C Mixer: 2 pieces Capacity: 1x 410 ml Approval for fastenings in: Concrete C20/25 to C50/60, cracked, lightweight concrete blocks, ceramic blocks, Oustaki Silikatowe, solid silicate blocks, solid bricks Also suitable for: C12/15 concrete, concrete blocks, aerated concrete Advantages/benefits: The FIS VL system is approved for use in cracked concrete and masonry and achieves high strength values in these substrates. The injection mortar based on vinyl ester resin enables anchoring in holes filled with water (only for 410 ml cartridges) and thus enables rapid work progress. The temperature after the FIS VL injection mortar has set should be in the range of -40 °C to +120 °C, so that the mortar has a high load-bearing capacity even at higher temperatures. The FIS VL HIGHSPEED mortar has a significantly shorter setting time than FIS VL, so that faster work progress is possible even at low temperatures. Function: FIS VL mortar is a 2-component injection mortar based on vinyl ester resin. The resin and hardener are in two separate funnels and remain unmixed until activated by extrusion through the static mixer The 410 ml coaxial cartridge can be easily dosed with the fischer FIS AC injection gun. A partially emptied cartridge can be reused by replacing the static mixer. Accessories for use in concrete or masonry can be found on the page