Electrical wall distributor 1x 16A / 32A 2x230V with main switch construction power distributor

1 x angle socket 16A 5P 400V IP44 fully wired and protected C16A 3P, 1 x 32A 5P 400V IP44 angle socket fully wired and protected C32A 3P, 2 x fixed single phase socket with a pin 16A 230V IP54 fully wired with a 2.5mm2 LGY cable and fused with 2 * C16 1P, all sockets connected to the residual current circuit breaker FI40/4/0.03A (protection of the sockets saves lives), 32A L-0-P switch panel switch, the switchgear is completely wired inside, it is sufficient to connect a 5-wire power cable, fuses bridged with a 63A comb strip, cables connected to the Z and N strips, PG21-Verschraubung included, 16A and 230V sockets always wired with a 2.5mm2 cable Product features 1 x angle socket 16A 5P 400V IP44 fully wired and protected C16A 3P, 1 x 32A 5P 400V IP44 angle socket fully wired and protected C32A 3P, 2 x fixed single phase socket with a pin 16A 230V IP54 fully wired with a 2.5 mm2 LGY cable and fused with 2 * C16 1P, all sockets connected to the residual current circuit breaker FI40/4/0.03A (protection of the sockets saves lives), 32A L-0-P panel switch, the switchgear is completely wired inside, all you need to do is connect a 5-wire power cable, fuses bridged with a 63A comb strip, cable connected to the Z- and N-strips, PG21-Verschraubung included, In our control cabinets, 16A and 230V sockets are always wired with a 2.5mm2 cable Our 32A sockets are always wired with a 4mm2 cable NOTE: Our sockets are the only version with nickel-plated contacts, which means that they do not oxidize or overheat. At the same time, they are more resistant to current overloads, which also has an impact on the SAFETY of the product and the user. high impact resistance of the housing (IK10), similar products are only IK07, large installation space - 12 modules, housing tightness: IP65, tightness of the set: IP44, 5 x 10 mm input terminals, UV-resistant 12-field viewing window, housing dimensions: 370x265x135mm [height x width x depth]