10x lawn grid, platform tiles, parking lot, garden, sidewalks, paving

PRICE FOR A PACKAGE OF 10 ST. for approx. 2.5 M2 It is a product made from recycled plastic. It is a grid designed for pedestrian and car traffic. It will be a great alternative to pavers. TECHNICAL DATA Dimensions: 50 × 50 cm Height: 3 cm Wall thickness: 3 mm Material: Plastic Strength: 180 t/m2 Weight: 0.95 kg Color: Black Number of connecting hooks: 6 Temperature resistance: Yes Quantity in the packaging: 10 pieces. Quantity per m²: 4 parking spaces - filling with aggregates Access roads Hiking and cycling paths Access to the property Border crossings Horse stables, riding areas Golf courses Camping Bicycle parking spaces Green roofs Green parking spaces To prevent weeds from growing, a geotextile can be spread directly under the grid. Decorative aggregates with a size of 5-20 mm are best suited for backfilling. Grates should be completely covered with aggregate. If left unfilled, they may become damaged during operation. Filled grates can be shaken again with a compactor with rubber pads, which distributes the aggregate evenly. If the infill falls below the edge of the trellis, level it so that it completely covers the walls of the trellis. Advantages of plastic grids: Ecological solution - Kraka P3 GardenPlus is environmentally neutral thanks to its ingredient - recycled plastic. The P3 driveway grill is made of 100% this material and will withstand any car. In rare cases it needs to be repaired even after many years of use. The plastic used in the P3 grid is resistant to UV radiation, frost and high temperatures, and also does not decompose or penetrate the soil, which benefits our planet. Stormwater Control – Unfortunately, rain can carry pollutants from our cars into sewers, and these runoffs often directly feed lakes and streams. To prevent this, it is important that rainwater is filtered before it enters the ground. The water that seeps into the ground is naturally purified, which is good for our environment Sludge Control! - Gravity allows water to flow freely and seep into the ground, avoiding the formation of mud patches and potholes. In the past, gravel driveways have been the cause of mud, but using a grid system allows water to be effectively drained away from the surface. Cost Savings – The P3 grid is an investment that was initially more expensive than asphalt, but cheaper than concrete or pavers. In the long term, however, enormous savings can be achieved, both for the environment and for our wallets. Garden screens prevent the loss of gravel and slow its migration, reducing leaching and trapping of stones in the holes. The systems installed across Europe are durable and last for many years without maintenance or repairs. The 500 x 500 mm parking gate has protruding hooks on both sides and specially prepared recesses in the wall on both sides. The connection is made by inserting the hook into the recess. Laying the GardenPlus P3 lawn grids begins at the corner of the embedding compound and leaves an expansion joint 2-5 cm from the edge. After laying, fill it with soil or aggregate. Edging for eco-grid The lawn grid area can be bordered by a concrete border, a plastic border, slats or a row of paving stones, etc. The minimum outside temperature at which it is recommended to install the grass grid surface is at least 5 °C. At our other auctions you will find parking barrier surrounds at rock bottom prices! ⭐ Valuable tip – dilation! If the grille is installed near permanent elements such as asphalt pavement, concrete curb, lamp post, manhole, a distance of at least 3 cm should be maintained. Stretching is necessary due to the properties of the material, which expand in summer and contract in winter. This will prevent the grilles from bulging in the summer. The grids can be cut with an angle grinder or secateurs.